You must have come across the word Bulk Network Cables. They are a hardware deployed to connect one network device to another or to connect computers with other devices. These cables bare wire and require plugs at both ends to fit the devices to be connected. You can also use them to connect various monitors and monitors to external input or output devices.
With the advent of tutorials and written knowledge all over the internet, people are increasingly adopting DIY for making bulk network cables.
Many users like to do build them solely for their interest in creating their own hardware and there’s another side to it as well. Making your own network cables is very cost-effective as compared to store bought ones. You can order bulk network cables at lower prices and join with them plugs that are also available at pretty competitive prices if bought in packets. All in all, you can make your own network cables at half the price than the ready made ones.
Moreover, with ready made network cables, you are stuck with the length of the cable the manufacturer provides which isn’t always feasible to your necessities. By doing it yourself, you can choose the desired length of cable with quality plugs to go with it.
Firstly, choose the kind of cable you want to use for it. Ordering bulk network cables from an online store is not only cheaper but you can choose from a wide range of guaranteed quality products delivered at your doorsteps. There are many variants of these cables available; you can choose the one according to your requirements. There are also options for colors and lengths syncing with your needs. The cables can be CAT-1, CAT-2, CAT-3, CAT-4, CAT-5, CAT-5E, CAT-6, CAT-6E, and CAT-7. The 5E cable is most frequently used however you can go for Cat-6 and above for a greater transmission speed.
A network-cable tester also comes handy to confirm that your cables are wired properly. It isn’t an absolute necessity but saves a lot of time if you have any issues with the cable or connection while working on it.
Even though the procedure isn’t child’s play, it isn’t very complicated as well. There are a few things you should keep in mind and rest is good to go. A network cable consists of the skin and 8 lines inside it. The 8 lines need to be connected to the plug in a systematic order or else your cable won’t work. Also, make sure your plug is of the standard size that fits well into the computer socket.
To make a straight-through cable a different scheme is required than making a crossover cable, so you need to take care of the combinations as well.
Making DIY network cable is easy if the instructions are followed carefully and you get the right cables and plugs to go with it. But it comes with its own risks and dangers. DIY Network cables can sometimes be the reason for grave accidents if the connection isn’t built properly. If you are an amateur at electronic knowledge, it’s best to trust an expert manufacturer. Moreover, you can get your exact requirements at online stores which offer an extensive range of cables and electronic accessories.